Call Today · 9am–10pm

Grey diagonal solid-infill double driveway gate in front of a contemporary UK house

Gate Styles

Swing gates, in traditional and contemporary directions.

Single or double-leaf, open estate railing through to full-privacy contemporary infill — swing gates need clear space for the arc, and suit most standard driveway openings.

How Swing Gates Work

Mechanically simple, and a natural fit for period driveways.

A swing gate opens on hinges, through an arc into the property. That means clear space is needed on the inside of the boundary — usually a little more than the width of each leaf, on level ground. Double-leaf gates split a wide opening across two leaves rather than one long panel.

Not sure whether your driveway suits a swing gate or a sliding gate? Read our comparison guide or request a survey and we’ll advise directly.

Beninca

Automation Technology

Swing gate operators — ram, articulated arm or underground — are specified from established gate-automation manufacturers, chosen around the leaf weight and the space available at each hinge.

Planning A Swing Gate

What decides whether a swing gate will work on your drive.

Clear space for the arc

Each leaf sweeps an arc slightly longer than its own width, so the ground inside the gate line needs to be clear of parked cars, steps, planting and walls. Double-leaf gates halve the length of each arc, which is often what makes a swing gate fit a wider opening.

Opening inwards, not over the road

In England and Wales the Highways Act 1980 prevents gates opening outward over a public highway or footway, so swing gates almost always open into the property. Where the drive meets the pavement with no room behind, a sliding gate is usually the answer.

See sliding gates

Slopes and rising drives

A leaf swinging into a drive that rises behind it will hit the ground part-way through its arc. Rising hinges, a re-profiled drive or splitting the opening differently can solve it — this is one of the main things a survey checks.

Choosing the operator

Ram operators suit pillars where the hinge sits close to the face; articulated arms suit deep piers; underground operators hide the motor in a sealed foundation box under each hinge, which suits listed or formal frontages but needs good drainage.

Wind load and privacy

Solid, full-privacy leaves act like a sail. They are entirely workable as swing gates, but the operator, hinges and gate stop are specified for the load, and an electric lock may be added so the gate stays shut in strong wind.

Pedestrian access

A matching pedestrian gate lets people in on foot without opening the driveway leaves — and gives a natural, visitor-height position for a keypad or intercom.

Pedestrian companion gates

Questions

Swing gates — common questions.

It depends mainly on your driveway. Swing gates need clear space for the arc of the gate to open; sliding gates run along a track or cantilever system and suit narrower or sloped driveways where a swing arc isn't practical. We'll advise on the right fit during your survey.

Yes. Gate width, height and design are specified to the opening measured during your survey rather than fixed standard sizes.

Explore sliding gates instead

Let's design the right entrance for your property.

Request a survey, start a quotation online, or speak to a specialist directly — whichever suits you best.